设备面板厂家

NewsNews

Contact us

Tel.: + 86 755 8969 9951

Fax: + 86 755 8969 9290

Website: www.jpcelerectronic.com

Address: No.49, Xinhe Road, shangmugu village, Pinghu street, Longgang District, Shenzhen

Your current location: Home >> News >> Industry information

What are the processes of acrylic

2019-08-26
times

1. cutting

Laser cutting is a non-contact cutting method. Laser can cut all kinds of patterns, words, etc. laser cutting technology is to use laser beam to irradiate the surface of acrylic plate, and then the laser releases energy to melt the acrylic. Laser cutting can be used to cut and process a variety of very complex patterns, characters or logos, etc., so that complex shapes that meet the requirements of acrylic processing can be processed. As long as the cut materials are polished, the high transparency of acrylic materials can be restored.

2. punch

Acrylic can be drilled directly by drilling machine. Compared with glass, acrylic has very good machining characteristics. According to the requirements of the processing drawing, it should be fixed directly on the drilling machine, and it is good to drill directly. Acrylic can also use CNC drilling, so the processed acrylic parts have a very high assembly accuracy, just need to input various parameters on the drawing on the computer, and then use the computer to control the CNC machine to locate the acrylic processing and drilling.

3. polishing:

Acrylic itself has high transparency, which can be compared with the naturally produced crystal, so we need to restore the high transparency of acrylic itself after polishing, and acrylic processing and polishing can use traditional cloth wheel polishing or diamond polishing or fire polishing. The sequence is generally after diamond polishing; after using fire polishing to remove the burr of the corner, the acrylic products will become smooth; finally, the cloth wheel polishing will be used, and the acrylic products with a transparency of more than 92% can be polished after a wax is applied to the cloth wheel.


手机镜片厂

4. hot bending

Because the acrylic material will soften at 70 ° to 100 °, the hot bending technology can be used to process acrylic into various shapes and irregular accessories that we need. The hot bending of acrylic can be realized in different ways. At the same time, many pieces of acrylic plates can be put on a set of hot bending machine and setting die for hot bending. Most of the hot bending is only through the hot bending of single line or parallel line. The angle of hot bending can be determined according to the needs of the die to control the angle.

5. bonding

Bonding is a very important process, all of which are processed by hand. Therefore, the experience of employees is needed at this time. Moreover, the bonding process of acrylic products should be strictly controlled, not only to the position of the drawing design, but also not to stick askew, blister or not firmly, so the strictly controlled products will be allowed to be shipped.

6. assembly

It is self-evident that the final assembly is to combine all kinds of processed acrylic parts, and then complete a complete product. At this time, the final quality inspection shall be carried out for the whole product, and the product can only be packed and shipped after it is confirmed to be correct.

label

Recently, browse:

Contact

Tel.: + 86 755 8969 9951

Fax: + 86 755 8969 9290

Address: No.49, Xinhe Road, shangmugu village, Pinghu street, Longgang District, Shenzhen

Copyright © Shenzhen high quality Electronic Technology Co., L All rights reserved Record number:粤ICP备19103506号-1 Specializing inMobile lens factory, mobile lens factory, equipment panel factory,Welcome to inquire! Technical support:Xiangyun platform Service support:hx300.cn

111.jpg