设备面板厂家

NewsNews

Contact us

Tel.: + 86 755 8969 9951

Fax: + 86 755 8969 9290

Website: www.jpcelerectronic.com

Address: No.49, Xinhe Road, shangmugu village, Pinghu street, Longgang District, Shenzhen

Your current location: Home >> News >> Industry information

Manufacturing method of acrylic processing

2019-08-26
times

1. hot pressing method

After heating the plexiglass sheet, it is hot pressed in the mold. This kind of handicraft has the characteristics of full body, fluent curve, strong plane sense and relief effect. The hot pressing die can be made of wood and oil mud, then the materials of cast lead and gypsum can be used as the internal and external mold, and the plexiglass can be pressed after heating.

2. grinding method

Plexiglass will stack and paste the plate-shaped plexiglass together, and then directly grind the cross-section to form. The handicraft made by this method can get the effect of changeable color and simple and natural.

3. paste method

After cutting the plexiglass into a certain shape, it is pasted on the plane.


手机镜片厂家

4. hot simmer

Process the plexiglass to a certain shape, heat the plexiglass, and directly nest and knead it by hand. The handicraft made by this method has the advantages of bold lines, simple image and so on. The above several methods can be used alternately. According to the artistic request of the exterior design, a better method can be determined.

Acrylic processing requirements

1. Creative design: the color pattern of acrylic processing products can be designed at will, and can be combined with a variety of processes such as screen printing or carving. The shape can be designed according to the product needs.

2. Scraping laminating adhesive: the characteristics of acrylic and laminating adhesive materials shall be considered during processing, and the colorless and transparent one is better. Choose the dust-free workshop, and then make 100-200 mesh version, scrape on the acrylic, let it dry naturally.

3. Hot pressing: check the acrylic coated with glue first. If there is dust on it, clean it first. After cleaning, put the designed and printed Eucalyptus (printed matter, PVC is recommended) in the middle of two acrylic coated or multi-color acrylic for hot pressing.

4. Carving: carve the pressed acrylic plate according to the picture.

5. Grinding and polishing: after grinding and polishing, the product shall be cleaned and the process shall be completed. After the production, the signs are bright in color, smooth in surface and crystal clear.


label

Recently, browse:

Contact

Tel.: + 86 755 8969 9951

Fax: + 86 755 8969 9290

Address: No.49, Xinhe Road, shangmugu village, Pinghu street, Longgang District, Shenzhen

Copyright © Shenzhen high quality Electronic Technology Co., L All rights reserved Record number:粤ICP备19103506号-1 Specializing inMobile lens factory, mobile lens factory, equipment panel factory,Welcome to inquire! Technical support:Xiangyun platform Service support:hx300.cn

111.jpg